|
Article Groups
Service
|
div id="content">
|
Water cooled cables used in welding machines
Technical data
Technical design
Our water cooled cables for applications inside of welding maschines
or welding devices are available in different designs. Type B is equipped
with contact ends according to our druseidt specification and the types C
and D are in accordance with DIN EN ISO 8205-2. The connection between the
contact ends and the conductor rope is realized by a solderless
crimp-process, so that an optimized current transfer is guaranteed.
The construction of the conductor ropes as well as the high quality
water hoses offer an excellent flexibility.The cables can be used also
for welding roboter applications. The well thickness (circa 4,5 mm) of our
standardized hoses is acc. to the description on page 51. For special
applications, requiring a very high flexibility, we offer tubes with a reduced wall
thickness. Additionally to pur standardized designs we deliver cables according to
your drawings/samples or wishes up to a crosssetion of 1000 mm˛. |
contact area design 1 contact
area design 2 contact
area design 3 |
|
Deliverable standard designs:
Type B = contact areas on both sides design 1
Type C = contact areas on both sides design 2
Type D = contact areas one side design 2
and design 3 at the other side
Other variations on request.
Remark: Information about current-capacities for welding
applications are contained in the DIN EN ISO 8205-2. Information for current
capacities for other applications on request.
operating pressure: max. 6 bar
testing pressure: 10 bar |
|