|
Article Groups
Service
|
|
Part-No.
|
max.
cutting-Ø
|
max. cutting capacity |
length |
weight
kg/ pcs. |
stranded |
flexible |
sector shaped conductors |
12607 |
35 mm |
240 mm² |
240 mm² |
4 x 70 mm² |
250 mm |
0,93 |
12608 |
Compensation swinging blade for 12607 |
|
|
12603 |
52 mm |
400 mm² |
500 mm² |
4 x 120 mm² |
325 mm |
1,20 |
12604 |
Compensation swinging blade for 12603 |
|
|
12609 |
62 mm |
750 mm² |
750 mm² |
4 x 185 mm² |
410 mm |
2,00 |
12614 |
Compensation swinging blade for 12609 |
|
|
12626 |
80 mm |
1000 mm² |
1000 mm² |
4 x 240 mm² |
610 mm |
3,00 |
12627 |
Compensation swinging blade for 12626 |
|
|
up |
|
|
|
Front cutting tools with rachet |
|
for copper- and aluminium cables |
|
|
|
Mechanical hand operated front cable cutters with ratcht and high cutting capacities. Also suitable for working in cramped coditions such asin tunnels or inside of connecting sleeves. Part-No. 11100 and 11102 with needle bearing. Part-No. 11104 and 11106 with special eccentric drive and optimized cutting knife geometry to enable low force cutting proceures. The cutting procedure starts when swinging the moveable hand lever. The cable cutter Part-No.11100 offer a one hand operation. All cable cutters are not applicable for cutting steel-wires, cables with steel insertion or solid conductors. |
|
|
|
|
|
|
11100 |
|
11102 |
|
|
|
|
|
|
11104 |
|
11106 |
Part-No.
|
max.
cutting-Ø |
max. cutting capacity |
length |
weight
kg/pcs. |
stranded |
flexible |
sector shaped conductors |
11100 |
25 mm |
120 mm² |
120 mm² |
4 x 25 mm² |
245 mm |
0,9 |
11101 |
Compensation swinging blade for 11100 |
11102 |
34 mm |
185 mm² |
240 mm² |
4 x 50 mm² |
330 mm |
1,3 |
11103 |
Compensation swinging blade for 11102 |
11104 |
35 mm |
240 mm² |
300 mm² |
4 x 70 mm² |
330 mm |
1,4 |
11105 |
Compensation swinging blade for 11104 |
11106 |
55 mm |
500 mm² |
500 mm² |
4 x 120 mm² |
485 mm |
3,0 |
11107 |
Compensation swinging blade for 11106 |
|
|
|
|
up |
|
Tool bags |
|
for cutting tools with ratchet |
|
|
|
|
|
|
|
|
|
Part-No.
|
suitable for cable cutter |
design |
11110 |
12607 / 11100 |
Made out of woven textile with padding, slip in pocket and zip fastener. Ideally suitable to transport and keep safe our cable cutters with rathcet or similar tools.
|
11111 |
12603 / 11102 / 11104 |
11112 |
12609 / 11106 |
|
|
|
|
up |
|
Cutting tools with ratchet for copper- and aluminium cables |
|
with adjustable telescope arms |
|
|
|
Mechanical hand operated cutters with ratchet. Suitable for cutting of stranded and flexible copper- and aluminium as well as soft steel thin sheet covered cables. Not applicable for cutting steel-wires, cables with steel insertion or solid conductors. The telescope arms are adjustable to a range of length. Compined with the ratchet drive it is possible to realize a cutting procedure with low forces. When acivating the emergency release the cutter can be opened in any cutting position. The telescope arms are made out of light rigid aluminium with 2-component grips. |
|
|
Easy, time-saving use with quick pre adjustment |
|
Part-No.
|
max.
cutting-Ø |
cutting capacities |
length |
weight
kg/pcs. |
stranded |
flexible |
sector shaped conductors |
05404 |
60 mm |
630 mm² |
800 mm² |
4 x 185 mm² |
610-810 |
3,85 |
05405 |
Spare blade for 05404 |
05406 |
100 mm |
800 mm² |
1000 mm² |
4 x 240 mm² |
660-860 |
4,98 |
05407 |
Spare blade for 05406 |
|
|
|
|