Article Groups

Service

Your position : Flexible Connectors : Earthing tapes and flexible connectors : Flexible insulated earthing tapes and copper connectors 10-210 mm² with solderless pressed contact areas

design A

design B

Part-No. 15577

Flexible insulated earthing tapes and copper connectors 10-210 mm²
with solderless pressed contact areas

Technical data

Construction and application

Manufactured by flexible PVC-extruded braided copper tapes with solderless pressed contact areas made out of seamless Cu-ETP-tubes. The crimping process is realized without using additives like tin or soldering and welding additives. We use exclusively materials of same analysis and same conductivity of 57 S (braids and tubes).

So the hereby used druseidtpress technology guarantee a extreme compressing and a optimal contact resistance by compressing the wires so much, that no harmful gases or other environmental influences can go inside. By using our connectors you can be sure to have a very well and optimized contact resistance.

Caused by the technical characteristics of the insulating material and the flexibility of the braids the connectors offer multifarious applications inside switchgears or control panel devices up to app. 730 A as well as earthing connections.

Technical data

Electrical conductor

braided copper tapes made out of Cu-ETP-wires
annealed, uncoated wires
wire-Ø 0,15 mm (10/16 mm2)
wire-Ø 0,20 mm (25-210 mm2)

Contact areas

seamless copper tubes made out of Cu-ETP material
surface uncoated or tinned

Insulation

special vinyl compound
black, free of lead
self-extinguishing acc. to UL 94 VO
elasticity 365%
dielectric strength 20 kV/mm
operating voltage max. 1 kV
operating temperature -20° C up to +105° C

Part-No.		technical data
design A	design B	cross-section mm²	current- load	dimensions mm
design A	design B	cross-section mm²	current- load	B₁	B₂	ca. s	d	L
15415	15560	10	75-105 A	12	12	3,0	5,5
15416	15561	16	100-150 A	15	15	3,3	6,5
15417	15562	25	145-210 A	20	20	3,8	9
15418	15563	25	145-210 A	25	25	3,5	9
15419	15564	35	170-250 A	20	20	4,3	9
15420	15565	35	170-250 A	25	25	3,6	9
15421	15566	50	205-300 A	25	25	4,7	9
15422	15567	50	215-310 A	30	30	4,3	11
15423	15568	70	245-355 A	25	25	6,0	9
15424	15569	70	245-355 A	30	30	5,0	11
15425	15570	70	270-390 A	35	35	5,4	11
15426	15571	70	270-390 A	40	40	5,2	14
15427	15572	100	325-470 A	35	35	6,1	11
15428	15573	100	325-470 A	40	40	7,2	14
15429	15574	120	375-540 A	40	40	8,0	14
-	15575	140	405-580 A	40	40	8,6	14
-	15576	210	505-730 A	40	40	9,8	14
-	15577	210	505-730 A	50	50	8,0	14

Remark: Manufacturing acc. to the customers’ wishes in large as well as small quantities. Uncoated braid and uncoated contact areas are standard. But on request with tinned contact areas and bare braid or with changed drill holes deliverable. By ordering the design with tinned contact areas it is necessary to add the word tinned behind the part-No. (e.g. 15570 tinned). All information about current load are approximate values in consideration of the cables heat for single laying of air cooled cables and ambient temperature +35° C. Minimum value = conductor temperature app. +65° C. Maximum value conductor temperature app. +90° C. The temperature of the conductor is in dependent on the installation, the application, the cooling, the ambient temperature etc., so that if necessary reducing factors are to be considered. With pleasure our employees assist your company in finding optimal solutions.

Enquiry form

to the top

up - Print page - info@druseidt.de