|
Article Groups
Service
|
High Current Contactors for Work Rod Systems
Bolt Contact Modules 400 - 1250 A
with Spring-Fed Contact Bolts
Drawings
Technical Data
Accessories/Replacement
parts
Pneumatically activated
Bolt Contact Modules
The contact principle of this module is based
on our assembled bolt contacts shown on pages 3/10 and 3/11 of
this catalogue. Contact modules are suitable for transferring low
current in narrow spaces or for use in equipments with manual
operations. They are therefore quite often used as anode contacts
as well. By combining a few of these modules, more current can be
carried. The current transfer is done through the spring loaded
contact bolts by means of a beryllium disk. The contact bolts can
be exchanged from the outside. If desired, the modules can be
assembled and mounted on Cu or MS bars for delivery.
|
|
Bolt Contact Modules 1/2 Fold
|
Bolt Contact Modules 3/4 Fold
|
|
|
|
Part No. |
Version |
max.
load |
Dimensions mm |
Drill Holes |
Weight
kg/piece |
L |
L1 |
B |
H |
H1 |
17065 |
1 contact bolt |
400 A |
65 |
40 |
45 |
85 |
50 |
M8 |
1,20 |
17040 |
2 contact bolts |
750 A |
65 |
40 |
45 |
123 |
90 |
M8 |
1,70 |
17041 |
3 contact bolts |
1000 A |
65 |
40 |
100 |
123 |
90 |
M8 |
3,60 |
17042 |
4 contact bolts |
1250 A |
65 |
40 |
100 |
123 |
90 |
M8 |
3,70 |
Replacements |
50215 |
Installation ready replacement contact bolts, Silver plated |
0,17 |
55216 |
Replacement springs – Stainless steel, Normal Version |
|
55217 |
Replacement springs – Stainless steel, Heavy Version |
|
For special applications, pneumatically activated
bolt modules are also available. These contacts can be used everywhere
that contact cannot be made directly because of low current- or bus-bar
weights. Pneumatically activated bolt modules are relatively small and
can also be used as switching elements. These are only produced after
suitability testing for the application.
|
|
Pneumatically Activated Bolt Modules |
Test Unit for Determining Switching Rate |
|
|